How To Set The Weather On Apple Watch

I of the things I really love almost my Apple tree Watch is but how easy information technology is to see what the weather is in existent-time with just a glance at my Apple Spotter.

And that conditions report is almost always on-spot with its temperature and current conditions report, and then I know if I demand a jacket or non, an umbrella, gloves, or zippo at all!

But at times, my Apple Sentinel stops updating the Weather app, and the weather I see on my watch's screen doesn't match what's really happening outside.

I know this problem isn't just my watch, so I put together this guide to walk you through the steps to get your atmospheric condition updating in real-time on your Apple Watch too!

This commodity outlines steps to troubleshoot the Apple Weather app; all the same, if y'all utilize a third-party weather app, similar The Weather condition Channel or Carrot, follow the same steps and substitute your preferred weather app in the directions.

And so permit'due south get to it!

Related reading

• How to get rain, snowfall, and severe weather alerts on iPhone and Apple Watch
• Pop Weather app Carrot Weather condition gets a new redesign and Apple tree Watch complications
• My Apple tree Watch's screen and spotter face is upside downwards! It'south an easy fix

Cheque that your sentinel connects to data

Your Apple Scout must connect to the internet to update its data to update the weather. So make sure your watch has an active connection via WiFi or cellular data (via your iPhone for GPS lookout man models and via its own cellular data program for GPS+Cellular models with their cellular plan.)

To check your watch's connexion, swipe up Control Center and look for an active connection to WiFi or Cellular. Tap the WiFi or Cellular data icon once to plough it off and tap it again to turn it on and refresh its connexion.

If using Cellular information, make sure yous allow the Weather app access to use cellular information

• Open your iPhone's Settings app and choose your Conditions app. Make sure you lot toggled on Cellular Information.
• On GPS+Cellular models, open the iPhone's Watch app > My Watch tab > Cellular. Discover the Conditions app in the Cellular Data Usage section.

GPS-only Apple Watches should likewise verify that their Apple tree Sentry is successfully connected to their paired iPhone.

Open Control Eye and await for the dark-green telephone icon at the top. If it's red, place your watch and phone next to each other and check that AirPlane fashion is off and WiFi and Bluetooth are on. Restart your watch and run into if that icon is now green.

Open the Conditions app on your watch

If your Apple Watch confront isn't automatically updating the conditions to current weather, open the Atmospheric condition app on the watch and meet if the weather updates. If you use a different weather app, open that app.

If information technology'south correct in the Weather app only incorrect on your watch face, run across if information technology updated after opening it (or your preferred weather app.)

If the weather updated, you might accept turned off background app refresh for the app.

Get to the Lookout app > My Watch tab > Full general > Groundwork App Refreshor open your watch'southward Settings app > General > Background App Refresh. Verify that Background App Refresh is on.

Scroll down to the Weather app (or your preferred tertiary-political party conditions app) and toggle it on. Or if it'south already on, toggle it off, wait a few moments, and toggle it back on.

Check your picket face atmospheric condition complication settings

Your weather app complication may be set to something other than the temperature or your called weather metric (chance of rain, UV Alphabetize, Air Quality, and others.)

Then if you see some data in the area you fix for your watch's Weather app complexity, it might just be set to some other weather metric.

To check what yous selected, edit your watch confront using either the Watch app or printing on the watch face you currently use on your Apple Scout to open the sentinel face editor.

Choose the Weather app complication and review what atmospheric condition metric you selected. Change it to your preferred measurement.

Nosotros recommend selecting Weather to encounter your current outdoor temperature.

Additional tips for showing atmospheric condition on your Apple Watch face

• Endeavour removing the weather complexity from your lookout face and add together it back over again and meet if that fixes the problem.
• Temporarily change your watch face to another watch face and add the conditions complication to that watch face. Run into if a different watch confront makes a difference.

Open the Conditions app on your paired iPhone

See if the Weather app on your paired phone works there.

If and then, close the Weather app on your Apple Sentinel and then re-launch it and see if the weather updates and matches your iPhone.

To close the Weather app on your watch

1. Press theside push on the Apple tree Sentry once.
2. Scroll through the listed apps and swipe on the Weather app.
3. Tap the Ten icon to close it.
4. Then, open the Weather app again.

If the Weather condition app on your paired iPhone is as well wrong or endmost the Weather app didn't piece of work, go to the next suggestion and await at your location settings.

Check your watch's and paired iPhone'due south location

Getting accurate conditions data depends on your scout and iPhone having your correct location data. And then, permit'south check that your Sentry is using your current location.

Open the Spotter app and go to My Watch tab > Conditions > Default City > choose Current Location.

Once done, open up the Weather app on your watch or look at the Weather app complication on your watch face. Run into if it now shows the weather condition for your electric current location.

If not, check that yous allowed your iPhone's Weather app access to your location via Settings > Privacy > Location Services > Weatherand gear up the location permission to Always. Toggle on Precise Location.

Then go to Settings > Privacy > Location Services > Apple Watch Faces. Fix this to While Using and toggle on Precise Location.

Is Background App Refresh on for your weather apps?

To continually update the conditions on your Sentinel and iPhone, you need to allow the Weather app to refresh its data in the background, even when you aren't actively using the app or its widget.

1. Check that you lot turned on Background App Refresh in your iPhone's Spotter app > My Lookout man tab or via the Settings app on your sentinel.
2. Become to General > Background App Refresh.
3. Whorl to the Conditions app and plough it on. Or if it's on, toggle it off then dorsum on.

If you use whatsoever other third-party weather condition apps, echo these steps for that app.

Try a good ole restart of your spotter and iPhone

Powering off and on your iPhone and watch. Kickoff outset with your iPhone, and then power off/on your sentinel.

• Restart your iPhone by pressing the side button and one of the volume buttons. Slide to power off, await a few moments and so press the side push to ability it back on.
• Restart your sentry past pressing the side push button and then slide to power off. Wait a few moments, then press the side button again and keep pushing it until you lot meet the Apple logo on its screen.

Try a forced restart on both devices if a regular restart didn't do the trick. Outset with your paired iPhone and then force restart the Apple Watch.

Finally, if nothing worked and your atmospheric condition is yet wrong or not showing

• For third-political party atmospheric condition apps, endeavour uninstalling and reinstalling the weather app on your lookout.
  • To remove an app from your watch, open the Watch app > My Lookout tab and scroll down to the department Installed on Apple Watch. Choose your preferred atmospheric condition app and toggle Show App on Apple Watch off to uninstall it.
  • In one case uninstalled, scroll further downward to Bachelor Apps and tap the atmospheric condition app'due south Install button to reinstall it on our lookout man.
• For Apple apps, like the Weather app, uninstall and reinstall the app on your paired iPhone.
  • When y'all remove a born Apple app from your iPhone, Apple tree also uninstalls information technology from your Apple Spotter.
  • To reinstall a congenital-in Apple app, download it from the App Store on your iPhone or Apple tree Watch.

If cipher works at all, we suggest your unpair and re-pair your Apple Watch to your iPhone. Attempt restoring from a fill-in first; however, if issues persist, unpair/re-pair information technology once more, and this fourth dimension ready your sentry up as new.

Source: https://www.myhealthyapple.com/is-your-apple-watch-not-updating-the-weather-lets-fix-it/

Share this post